PET Bottles – The modern Park Keeper's bane



Everywhere that we look in these days in parks and open spaces there are litter bins nigh on overflowing – on a (more or less) daily basis – with discarded PET bottles. The great majority of those come from bottled water – which is a scam anyway – and also to a lesser extent and degree from soda pop, such as Coke, Pepsi, Dr Pepper, Lilt, etc.

Not only, though, do we see empty bottles in the litter bins; nay, even full, often unopened, bottles of water of different sizes are found on a rather regular basis.

While rehydration during any activity, even including simply walking, especially in warn and hot weather (but also during cold and winter), is essential to good health there is no need whatsoever to go and buy bottled water.

Bottled water is NOT better for you than tap water (unless, maybe you happen to be abroad in foreign climes where the local tap water may be suspect) as, as research has shown now more than once by now that much, probably up to 75%, of all bottled water is in fact nothing but repackaged tap water and that therefore drinking bottled water is no more beneficial for you than drinking just plain old tap water. Is is also a fact that the hygiene standard of tap water, say Thames Water's water, is much higher than that of bottled spring water.

It would be more beneficial to both people's pocketbooks and the environment if they'd get refillable sports bottles of a good quality for a couple of bucks and just filled them up with tap water. Why would I pay say 60pence (about US$ 1) or thereabouts for a small 250ml bottle of water if I can fill a bottle up at home for nothing and simply take along with me. That way there is no bottle left behind either for once it is empty it does not weigh much.

But it would appear that people require education on this subject and therefore an educational campaign from the side of parks departments and possibly even organizations such as CABE might be called for.

© M V Smith, May 2007

QUICKFENCE SYSTEM SET TO TAKE THE UK BY STORM


An innovative fencing system manufactured in China is shortly to be available nationally in the UK after initial trials by distributor, B Rourke & Co. Ltd, the Burnley-based wrought ironwork specialists, has revealed a vast potential market.

Initially the Å’QuickFence system will offer specifiers two heights of post and rail system at 1200 mm and 1800 mm, in standard lengths of 2320 mm with flat, bow or spike tops and matching gates. With prices starting from just £31.00 per metre and a quality product manufactured from galvanised and powder coated steel, Rourke's trials have given the company confidence to begin mass imports of the fencing into the UK.

Barrie Ogden, Sales Director of Rourke's Urban Craft Division, commented, "We have been looking for a high quality economical system for some time and met the manufacturer of the system on one of our frequent supply chain trips to the Far East. We have been trialing it with various regional distributors for over a year before taking the plunge!"

"We now have a network of 30 regional distributors, all of whom also offer installation, across the country and are starting to place bulk orders to satisfy the demand that is beginning to develop."

"We were very impressed by the quality of the product and the ease of installation which will allow contractors to rapidly complete projects. The system incorporates an ingenious fixing system which allows angled joints and multiple steps of up to 100 mm per panel and also allows the actual width to be adjusted some 40 mm per panel."

"The potential market for such a cost-effective and easy to install system is huge and we're already supplying our regional distributors with repeat orders only a few weeks after receiving their initial stock. We already have plans for a flexible and Play Safe system to be launched in the middle of the year with several other developments at design stages."

For further details of the QuickFence system and your local distributor, please contact B Rourke & Co Ltd on (01282) 431405

B Rourke & Co. Ltd

Staying safe in the work place

Work and Safety Wear are part of the growing range of products from Course Care. Personal Protective Equipment (PPE) is part of a range carefully selected and designed to meet requirements of The Personal Protective Equipment at Work Regulations 1992 in relation to greenkeepers and all those working in the turf maintenance industry.

The Personal Protective Equipment at Work Regulations 1992 (PPEW Regulations) came into force on 1st January 1993 with the main requirement being that personal protective equipment is to be supplied and used at work wherever there are risks to health and safety that cannot be adequately controlled by other means.

To ensure adequate protection is afforded to employees and legislation is met, risk assessments should be carried out and equipment carefully chosen and supplied by the employer. Ask your PPE supplier for advice if you are unsure, as various options may be available depending on the nature of the risks involved. All equipment purchased, however, should be ‘CE’ marked and comply with the Personal Protective Equipment Regulations 2002.

Risk assessments should include the following six main hazard areas. Types of PPE are shown in each case;

Eyes

Hazards: chemical or metal splash, dust, projectiles, gas and vapour, radiation. Options: safety spectacles, goggles, faceshields, visors.

Head

Hazards: impact from falling or flying objects, risk of head bumping, hair entanglement.
Options: a range of helmets and bump caps.

Breathing

Hazards: dust, vapour, gas, oxygen-deficient atmospheres.
Options: disposable filtering facepiece or respirator, half or full face respirators, air-fed helmets, breathing apparatus.

Protecting the body

Hazards: temperature extremes, adverse weather, chemical or metal splash, spray from pressure leaks or spray guns, impact or penetration, contaminated dust, excessive wear or entanglement of own clothing.
Options: conventional or disposable overalls, boiler suits, waterproof jackets and trousers, specialist protective clothing, e.g. Hi-vis clothing, spraysuits, chainsaw wear.

Hands and arms

Hazards: abrasion , temperature extremes, cuts and punctures, impact, chemicals, electric shock, skin infection, disease or contamination. Options: gloves, gauntlets, mitts, wristcuffs, armlets.

Feet and legs

Hazards: wet, electrostatic build-up, slipping, cuts and punctures, falling objects, metal and chemical splash, abrasion.
Options: safety boots and shoes with protective toecaps and penetration resistant mid-sole, gaiters, leggings, spats.

N.B. Hearing protection and respiratory protective equipment provided for most work situations are not covered by PPEW Regulations because other regulations apply to them.

A full range of PPE to meet the needs of the hazards listed above is available from Course Care and staff will provide free advice.

CourseCare